Cycling   Find an Event    Pre-ride check     Supplies Checklist   Safety 
 Gear   Equipment description      Repairs On the Trail
 Planning Considerations  Resources  
Fill out an Itinerary 

Cleaning 

Every bike needs to be washed every  month of use and right after especially dirty rides (mountain and BMX  bikers!) Washing your bike will remove grit and road minerals as well as making it look good.
 Never put your bike up at the season's end without washing

What you need     A Scrubbing brush     Small brush    Sponge    Rags -Wet and Dry    A detergent (Joy)    A Bucket    Hose without a  nozzle Then

Mix the detergent with half a bucket of warm water. Using a sponge wash down the entire bike. Use straight detergent on greasy spots. Rinse the bike with the hose.  Use the brushes to remove dirt from the tight places the sponge couldn't fit. Wrap the sponge around each spoke and slide. Rinse off your bike. Dry the bike. Use  WD40 to disperse water from parts that can't be dried with a rag. Lubricate all moving parts to replace what was removed by the detergents

Click here to make wut2c.com your homepage 

   Go to top      Build an Itinerary

  About wut2.com       Advertise with us        Link to Us        Contact us     Report Errors         Job Opportunities          Legal           Copyright